Bånder

PitchSalienceFunction extends BaseAlgorithm
in package

PitchSalienceFunction

Inputs:

[vector_real] frequencies - the frequencies of the spectral peaks [Hz] [vector_real] magnitudes - the magnitudes of the spectral peaks

Outputs:

[vector_real] salienceFunction - array of the quantized pitch salience values

Parameters:

binResolution: real ∈ (0,100] (default = 10) salience function bin resolution [cents]

harmonicWeight: real ∈ [0,1] (default = 0.800000011921) harmonic weighting parameter (weight decay ratio between two consequent harmonics, =1 for no decay)

magnitudeCompression: real ∈ (0,1] (default = 1) magnitude compression parameter (=0 for maximum compression, =1 for no compression)

magnitudeThreshold: real ∈ [0,inf) (default = 40) peak magnitude threshold (maximum allowed difference from the highest peak in dBs)

numberHarmonics: integer ∈ [1,inf) (default = 20) number of considered harmonics

referenceFrequency: real ∈ (0,inf) (default = 55) the reference frequency for Hertz to cent convertion [Hz], corresponding to the 0th cent bin

Description:

This algorithm computes the pitch salience function of a signal frame given its spectral peaks. The salience function covers a pitch range of nearly five octaves (i.e., 6000 cents), starting from the "referenceFrequency", and is quantized into cent bins according to the specified "binResolution". The salience of a given frequency is computed as the sum of the weighted energies found at integer multiples (harmonics) of that frequency.

This algorithm is intended to receive its "frequencies" and "magnitudes" inputs from the SpectralPeaks algorithm. The output is a vector of salience values computed for the cent bins. The 0th bin corresponds to the specified "referenceFrequency".

If both input vectors are empty (i.e., no spectral peaks are provided), a zero salience function is returned. Input vectors must contain positive frequencies, must not contain negative magnitudes and these input vectors must be of the same size, otherwise an exception is thrown. It is highly recommended to avoid erroneous peak duplicates (peaks of the same frequency occurring more than once), but it is up to the user's own control and no exception will be thrown.

References: [1] J. Salamon and E. Gómez, "Melody extraction from polyphonic music signals using pitch contour characteristics," IEEE Transactions on Audio, Speech, and Language Processing, vol. 20, no. 6, pp. 1759–1770, 2012.

Category: Tonal Mode: standard

Table of Contents

Properties

$algorithmName  : string
$category  : string
$essentia  : EssentiaFFI
$mode  : string
$parameters  : array<string|int, mixed>
$algorithmHandle  : CData|null
$configured  : bool

Methods

__construct()  : mixed
__destruct()  : mixed
compute()  : array<string|int, mixed>
getAlgorithmName()  : string
getCategory()  : string
getMode()  : string
getParameters()  : array<string|int, mixed>
setParameter()  : self
configure()  : void
isValidParameter()  : bool
validateInput()  : void
cleanupAlgorithm()  : void
configureAlgorithmParameters()  : void
estimateOutputSize()  : int
executeAlgorithm()  : array<string|int, mixed>
executeGenericAlgorithm()  : array<string|int, mixed>
executeSpecificAlgorithm()  : array<string|int, mixed>
getAlgorithmCreateFunction()  : string
getValidParameters()  : array<string|int, mixed>
initializeAlgorithm()  : void
prepareInput()  : mixed
processOutput()  : array<string|int, mixed>
processRhythmOutput()  : array<string|int, mixed>
processSpectralOutput()  : array<string|int, mixed>
processStatsOutput()  : array<string|int, mixed>
processTemporalOutput()  : array<string|int, mixed>
processTonalOutput()  : array<string|int, mixed>
setAlgorithmParameter()  : void
setArrayParameter()  : void
validateAlgorithmInput()  : void

Properties

$parameters

protected array<string|int, mixed> $parameters = []

Methods

__construct()

public __construct([array<string|int, mixed> $parameters = [] ]) : mixed
Parameters
$parameters : array<string|int, mixed> = []

compute()

public compute(mixed $input) : array<string|int, mixed>
Parameters
$input : mixed
Return values
array<string|int, mixed>

getAlgorithmName()

public getAlgorithmName() : string
Return values
string

getCategory()

public getCategory() : string
Return values
string

getParameters()

public getParameters() : array<string|int, mixed>
Return values
array<string|int, mixed>

setParameter()

public setParameter(string $key, mixed $value) : self
Parameters
$key : string
$value : mixed
Return values
self

configure()

protected configure(array<string|int, mixed> $parameters) : void
Parameters
$parameters : array<string|int, mixed>

isValidParameter()

protected isValidParameter(string $parameter) : bool
Parameters
$parameter : string
Return values
bool

validateInput()

protected validateInput(mixed $input, string $expectedType) : void
Parameters
$input : mixed
$expectedType : string

estimateOutputSize()

private estimateOutputSize(mixed $input) : int
Parameters
$input : mixed
Return values
int

executeAlgorithm()

private executeAlgorithm(mixed $input) : array<string|int, mixed>
Parameters
$input : mixed
Return values
array<string|int, mixed>

executeGenericAlgorithm()

private executeGenericAlgorithm(FFI $ffi, mixed $input) : array<string|int, mixed>
Parameters
$ffi : FFI
$input : mixed
Return values
array<string|int, mixed>

executeSpecificAlgorithm()

private executeSpecificAlgorithm(FFI $ffi, mixed $input) : array<string|int, mixed>
Parameters
$ffi : FFI
$input : mixed
Return values
array<string|int, mixed>

getAlgorithmCreateFunction()

private getAlgorithmCreateFunction() : string
Return values
string

getValidParameters()

private getValidParameters() : array<string|int, mixed>
Return values
array<string|int, mixed>

processOutput()

private processOutput(array<string|int, mixed> $result) : array<string|int, mixed>
Parameters
$result : array<string|int, mixed>
Return values
array<string|int, mixed>

processRhythmOutput()

private processRhythmOutput(array<string|int, mixed> $result) : array<string|int, mixed>
Parameters
$result : array<string|int, mixed>
Return values
array<string|int, mixed>

processSpectralOutput()

private processSpectralOutput(array<string|int, mixed> $result) : array<string|int, mixed>
Parameters
$result : array<string|int, mixed>
Return values
array<string|int, mixed>

processStatsOutput()

private processStatsOutput(array<string|int, mixed> $result) : array<string|int, mixed>
Parameters
$result : array<string|int, mixed>
Return values
array<string|int, mixed>

processTemporalOutput()

private processTemporalOutput(array<string|int, mixed> $result) : array<string|int, mixed>
Parameters
$result : array<string|int, mixed>
Return values
array<string|int, mixed>

processTonalOutput()

private processTonalOutput(array<string|int, mixed> $result) : array<string|int, mixed>
Parameters
$result : array<string|int, mixed>
Return values
array<string|int, mixed>

setAlgorithmParameter()

private setAlgorithmParameter(FFI $ffi, string $key, mixed $value) : void
Parameters
$ffi : FFI
$key : string
$value : mixed

setArrayParameter()

private setArrayParameter(FFI $ffi, string $key, array<string|int, mixed> $value) : void
Parameters
$ffi : FFI
$key : string
$value : array<string|int, mixed>

validateAlgorithmInput()

private validateAlgorithmInput(mixed $input) : void
Parameters
$input : mixed 

        

        
    




    

    

                                

                

                                
    

        On this page

        
    


                

                            

            

    

        

            
Search results