Bånder

HarmonicPeaks extends BaseAlgorithm
in package

HarmonicPeaks

Inputs:

[vector_real] frequencies - the frequencies of the spectral peaks [Hz] (ascending order) [vector_real] magnitudes - the magnitudes of the spectral peaks (ascending frequency order) [real] pitch - an estimate of the fundamental frequency of the signal [Hz]

Outputs:

[vector_real] harmonicFrequencies - the frequencies of harmonic peaks [Hz] [vector_real] harmonicMagnitudes - the magnitudes of harmonic peaks

Parameters:

maxHarmonics: integer ∈ [1,inf) (default = 20) the number of harmonics to return including F0

tolerance: real ∈ (0,0.5) (default = 0.20000000298) the allowed ratio deviation from ideal harmonics

Description:

This algorithm finds the harmonic peaks of a signal given its spectral peaks and its fundamental frequency. Note:

  • "tolerance" parameter defines the allowed fixed deviation from ideal harmonics, being a percentage over the F0. For example: if the F0 is 100Hz you may decide to allow a deviation of 20%, that is a fixed deviation of 20Hz; for the harmonic series it is: [180-220], [280-320], [380-420], etc.
  • If "pitch" is zero, it means its value is unknown, or the sound is unpitched, and in that case the HarmonicPeaks algorithm returns an empty vector.
  • The output frequency and magnitude vectors are of size "maxHarmonics". If a particular harmonic was not found among spectral peaks, its ideal frequency value is output together with 0 magnitude. This algorithm is intended to receive its "frequencies" and "magnitudes" inputs from the SpectralPeaks algorithm.
  • When input vectors differ in size or are empty, an exception is thrown. Input vectors must be ordered by ascending frequency excluding DC components and not contain duplicates, otherwise an exception is thrown.

References: [1] Harmonic Spectrum - Wikipedia, the free encyclopedia, http://en.wikipedia.org/wiki/Harmonic_spectrum

Category: Tonal Mode: standard

Table of Contents

Properties

$algorithmName  : string
$category  : string
$essentia  : EssentiaFFI
$mode  : string
$parameters  : array<string|int, mixed>
$algorithmHandle  : CData|null
$configured  : bool

Methods

__construct()  : mixed
__destruct()  : mixed
compute()  : array<string|int, mixed>
getAlgorithmName()  : string
getCategory()  : string
getMode()  : string
getParameters()  : array<string|int, mixed>
setParameter()  : self
configure()  : void
isValidParameter()  : bool
validateInput()  : void
cleanupAlgorithm()  : void
configureAlgorithmParameters()  : void
estimateOutputSize()  : int
executeAlgorithm()  : array<string|int, mixed>
executeGenericAlgorithm()  : array<string|int, mixed>
executeSpecificAlgorithm()  : array<string|int, mixed>
getAlgorithmCreateFunction()  : string
getValidParameters()  : array<string|int, mixed>
initializeAlgorithm()  : void
prepareInput()  : mixed
processOutput()  : array<string|int, mixed>
processRhythmOutput()  : array<string|int, mixed>
processSpectralOutput()  : array<string|int, mixed>
processStatsOutput()  : array<string|int, mixed>
processTemporalOutput()  : array<string|int, mixed>
processTonalOutput()  : array<string|int, mixed>
setAlgorithmParameter()  : void
setArrayParameter()  : void
validateAlgorithmInput()  : void

Properties

$algorithmName

protected string $algorithmName = 'HarmonicPeaks'

$parameters

protected array<string|int, mixed> $parameters = []

Methods

__construct()

public __construct([array<string|int, mixed> $parameters = [] ]) : mixed
Parameters
$parameters : array<string|int, mixed> = []

compute()

public compute(mixed $input) : array<string|int, mixed>
Parameters
$input : mixed
Return values
array<string|int, mixed>

getAlgorithmName()

public getAlgorithmName() : string
Return values
string

getCategory()

public getCategory() : string
Return values
string

getParameters()

public getParameters() : array<string|int, mixed>
Return values
array<string|int, mixed>

setParameter()

public setParameter(string $key, mixed $value) : self
Parameters
$key : string
$value : mixed
Return values
self

configure()

protected configure(array<string|int, mixed> $parameters) : void
Parameters
$parameters : array<string|int, mixed>

isValidParameter()

protected isValidParameter(string $parameter) : bool
Parameters
$parameter : string
Return values
bool

validateInput()

protected validateInput(mixed $input, string $expectedType) : void
Parameters
$input : mixed
$expectedType : string

configureAlgorithmParameters()

private configureAlgorithmParameters() : void

estimateOutputSize()

private estimateOutputSize(mixed $input) : int
Parameters
$input : mixed
Return values
int

executeAlgorithm()

private executeAlgorithm(mixed $input) : array<string|int, mixed>
Parameters
$input : mixed
Return values
array<string|int, mixed>

executeGenericAlgorithm()

private executeGenericAlgorithm(FFI $ffi, mixed $input) : array<string|int, mixed>
Parameters
$ffi : FFI
$input : mixed
Return values
array<string|int, mixed>

executeSpecificAlgorithm()

private executeSpecificAlgorithm(FFI $ffi, mixed $input) : array<string|int, mixed>
Parameters
$ffi : FFI
$input : mixed
Return values
array<string|int, mixed>

getAlgorithmCreateFunction()

private getAlgorithmCreateFunction() : string
Return values
string

getValidParameters()

private getValidParameters() : array<string|int, mixed>
Return values
array<string|int, mixed>

prepareInput()

private prepareInput(mixed $input) : mixed
Parameters
$input : mixed

processOutput()

private processOutput(array<string|int, mixed> $result) : array<string|int, mixed>
Parameters
$result : array<string|int, mixed>
Return values
array<string|int, mixed>

processRhythmOutput()

private processRhythmOutput(array<string|int, mixed> $result) : array<string|int, mixed>
Parameters
$result : array<string|int, mixed>
Return values
array<string|int, mixed>

processSpectralOutput()

private processSpectralOutput(array<string|int, mixed> $result) : array<string|int, mixed>
Parameters
$result : array<string|int, mixed>
Return values
array<string|int, mixed>

processStatsOutput()

private processStatsOutput(array<string|int, mixed> $result) : array<string|int, mixed>
Parameters
$result : array<string|int, mixed>
Return values
array<string|int, mixed>

processTemporalOutput()

private processTemporalOutput(array<string|int, mixed> $result) : array<string|int, mixed>
Parameters
$result : array<string|int, mixed>
Return values
array<string|int, mixed>

processTonalOutput()

private processTonalOutput(array<string|int, mixed> $result) : array<string|int, mixed>
Parameters
$result : array<string|int, mixed>
Return values
array<string|int, mixed>

setAlgorithmParameter()

private setAlgorithmParameter(FFI $ffi, string $key, mixed $value) : void
Parameters
$ffi : FFI
$key : string
$value : mixed

setArrayParameter()

private setArrayParameter(FFI $ffi, string $key, array<string|int, mixed> $value) : void
Parameters
$ffi : FFI
$key : string
$value : array<string|int, mixed>

validateAlgorithmInput()

private validateAlgorithmInput(mixed $input) : void
Parameters
$input : mixed 

        

        
    




    

    

                                

                

                                
    

        On this page

        
    


                

                            

            

    

        

            
Search results