Bånder

LogAttackTime extends BaseAlgorithm
in package

LogAttackTime

Inputs:

[vector_real] signal - the input signal envelope (must be non-empty)

Outputs:

[real] logAttackTime - the log (base 10) of the attack time [log10(s)] [real] attackStart - the attack start time [s] [real] attackStop - the attack end time [s]

Parameters:

sampleRate: real ∈ (0,inf) (default = 44100) the audio sampling rate [Hz]

startAttackThreshold: real ∈ [0,1] (default = 0.20000000298) the percentage of the input signal envelope at which the starting point of the attack is considered

stopAttackThreshold: real ∈ [0,1] (default = 0.899999976158) the percentage of the input signal envelope at which the ending point of the attack is considered

Description:

This algorithm computes the log (base 10) of the attack time of a signal envelope. The attack time is defined as the time duration from when the sound becomes perceptually audible to when it reaches its maximum intensity. By default, the start of the attack is estimated as the point where the signal envelope reaches 20% of its maximum value in order to account for possible noise presence. Also by default, the end of the attack is estimated as as the point where the signal envelope has reached 90% of its maximum value, in order to account for the possibility that the max value occurres after the logAttack, as in trumpet sounds.

With this said, LogAttackTime's input is intended to be fed by the output of the Envelope algorithm. In streaming mode, the RealAccumulator algorithm should be connected between Envelope and LogAttackTime.

Note that startAttackThreshold cannot be greater than stopAttackThreshold and the input signal should not be empty. In any of these cases an exception will be thrown.

Category: Sfx Mode: standard

Table of Contents

Properties

$algorithmName  : string
$category  : string
$essentia  : EssentiaFFI
$mode  : string
$parameters  : array<string|int, mixed>
$algorithmHandle  : CData|null
$configured  : bool

Methods

__construct()  : mixed
__destruct()  : mixed
compute()  : array<string|int, mixed>
getAlgorithmName()  : string
getCategory()  : string
getMode()  : string
getParameters()  : array<string|int, mixed>
setParameter()  : self
configure()  : void
isValidParameter()  : bool
validateInput()  : void
cleanupAlgorithm()  : void
configureAlgorithmParameters()  : void
estimateOutputSize()  : int
executeAlgorithm()  : array<string|int, mixed>
executeGenericAlgorithm()  : array<string|int, mixed>
executeSpecificAlgorithm()  : array<string|int, mixed>
getAlgorithmCreateFunction()  : string
getValidParameters()  : array<string|int, mixed>
initializeAlgorithm()  : void
prepareInput()  : mixed
processOutput()  : array<string|int, mixed>
processRhythmOutput()  : array<string|int, mixed>
processSpectralOutput()  : array<string|int, mixed>
processStatsOutput()  : array<string|int, mixed>
processTemporalOutput()  : array<string|int, mixed>
processTonalOutput()  : array<string|int, mixed>
setAlgorithmParameter()  : void
setArrayParameter()  : void
validateAlgorithmInput()  : void

Properties

$algorithmName

protected string $algorithmName = 'LogAttackTime'

$parameters

protected array<string|int, mixed> $parameters = []

Methods

__construct()

public __construct([array<string|int, mixed> $parameters = [] ]) : mixed
Parameters
$parameters : array<string|int, mixed> = []

compute()

public compute(mixed $input) : array<string|int, mixed>
Parameters
$input : mixed
Return values
array<string|int, mixed>

getAlgorithmName()

public getAlgorithmName() : string
Return values
string

getCategory()

public getCategory() : string
Return values
string

getParameters()

public getParameters() : array<string|int, mixed>
Return values
array<string|int, mixed>

setParameter()

public setParameter(string $key, mixed $value) : self
Parameters
$key : string
$value : mixed
Return values
self

configure()

protected configure(array<string|int, mixed> $parameters) : void
Parameters
$parameters : array<string|int, mixed>

isValidParameter()

protected isValidParameter(string $parameter) : bool
Parameters
$parameter : string
Return values
bool

validateInput()

protected validateInput(mixed $input, string $expectedType) : void
Parameters
$input : mixed
$expectedType : string

configureAlgorithmParameters()

private configureAlgorithmParameters() : void

estimateOutputSize()

private estimateOutputSize(mixed $input) : int
Parameters
$input : mixed
Return values
int

executeAlgorithm()

private executeAlgorithm(mixed $input) : array<string|int, mixed>
Parameters
$input : mixed
Return values
array<string|int, mixed>

executeGenericAlgorithm()

private executeGenericAlgorithm(FFI $ffi, mixed $input) : array<string|int, mixed>
Parameters
$ffi : FFI
$input : mixed
Return values
array<string|int, mixed>

executeSpecificAlgorithm()

private executeSpecificAlgorithm(FFI $ffi, mixed $input) : array<string|int, mixed>
Parameters
$ffi : FFI
$input : mixed
Return values
array<string|int, mixed>

getAlgorithmCreateFunction()

private getAlgorithmCreateFunction() : string
Return values
string

getValidParameters()

private getValidParameters() : array<string|int, mixed>
Return values
array<string|int, mixed>

prepareInput()

private prepareInput(mixed $input) : mixed
Parameters
$input : mixed

processOutput()

private processOutput(array<string|int, mixed> $result) : array<string|int, mixed>
Parameters
$result : array<string|int, mixed>
Return values
array<string|int, mixed>

processRhythmOutput()

private processRhythmOutput(array<string|int, mixed> $result) : array<string|int, mixed>
Parameters
$result : array<string|int, mixed>
Return values
array<string|int, mixed>

processSpectralOutput()

private processSpectralOutput(array<string|int, mixed> $result) : array<string|int, mixed>
Parameters
$result : array<string|int, mixed>
Return values
array<string|int, mixed>

processStatsOutput()

private processStatsOutput(array<string|int, mixed> $result) : array<string|int, mixed>
Parameters
$result : array<string|int, mixed>
Return values
array<string|int, mixed>

processTemporalOutput()

private processTemporalOutput(array<string|int, mixed> $result) : array<string|int, mixed>
Parameters
$result : array<string|int, mixed>
Return values
array<string|int, mixed>

processTonalOutput()

private processTonalOutput(array<string|int, mixed> $result) : array<string|int, mixed>
Parameters
$result : array<string|int, mixed>
Return values
array<string|int, mixed>

setAlgorithmParameter()

private setAlgorithmParameter(FFI $ffi, string $key, mixed $value) : void
Parameters
$ffi : FFI
$key : string
$value : mixed

setArrayParameter()

private setArrayParameter(FFI $ffi, string $key, array<string|int, mixed> $value) : void
Parameters
$ffi : FFI
$key : string
$value : array<string|int, mixed>

validateAlgorithmInput()

private validateAlgorithmInput(mixed $input) : void
Parameters
$input : mixed 

        

        
    




    

    

                                

                

                                
    

        On this page

        
    


                

                            

            

    

        

            
Search results